winbox
RouerOS AC
RouerOS AP
启用CAPsMAN服务Manager--Enabled
创建桥和（可做可不做，建议做）STP选项一定要选择RSTP怎样添加IP地址、DHCP、NA这里就不截图了（基本功）
创建CAPsMAN配置加密方式authentication-types 选择 WPA2-PSK WPA2-EAPencryption选择aes-ccmpassphrase设置密码
创建CAPsMAN配置 使用频段以及频宽Frequency是设置使用的频率Width设置频宽Band设置使用的频段以及相应的协议
创建配置规则Master Configuration 选择你刚才创建好的配置文件
启用CAP上的AP模式CAP--interface选择你的无线接口--discovery interface选择你连接到AC的网卡
识别到的AP会显示到下面
最后把识别到的AP添加到桥里面去就可以了
/interface bridge add name=APbridge/interface bridge port add interface=cap1 bridge=APbridge/ip address add interface=APbridge address=10.10.0.1/24/ip pool add name=APDHCP ranges=10.10.0.2-10.10.0.254/ip dhcp-server add name=APDHCP interface=APbridge address-pool=APDHCP lease-time=1d disabled=no/ip dhcp-server network add address=10.10.0.0/24 gateway=10.10.0.1/caps-man channel add name=channel1 band=2ghz-b/g/n width=20/caps-man configuration add name=cfg1 mode=ap ssid=FREE-WIFI max-sta-count=60 channel=channel1/caps-man provisioning add action=create-enabled master-configuration=cfg1/caps-man manager set enabled=yes
/interface bridge add name=bridge protocol-mode=rstp#接口根据你的设备做删减/interface bridge port add interface=ether1 bridge=bridge/interface bridge port add interface=ether2 bridge=bridge/interface bridge port add interface=ether3 bridge=bridge/interface bridge port add interface=ether4 bridge=bridge/interface bridge port add interface=ether5 bridge=bridge/interface enable wlan1/interface bridge port add interface=wlan1 bridge=bridgeinterface wireless cap set enabled=yes interfaces=wlan1 discovery-interfaces=bridge bridge=bridge#可选是否分配IP地址/ip address add address=192.168.1.2/24 interface=bridge设置时间时区/system clock set time=00:00:00/system clock set time-zone-name=Asia/Chongqing/system ntp client set primary-ntp=time.windows.com secondary-ntp=time.windows.com/system ntp client set enabled=yes#设置设备名称便于区分是那台AP/system identity set name=AP1#设置定时重启/system scheduler add name=reboot start-time=00:00:00 interval=30d on-event='/system reboot'#设置AP密码/user set admin password=rosm.cn